Allied Telesis AT-S63 - Manual (Page 142)

Chapter 11: Classifiers
142 Section II: Advanced Operations
Deleting a Classifier
To delete a classifier, perform the following procedure:
Note
A classifier must be removed from all access control lists and QoS
policies before it can be deleted.
1. From the home page, select Configuration.
2. From the Configuration menu, select the Network Security or
Services option. The Classifier tab is accessible from both menu
selections.
3. Select the Classifier tab.
The Classifier tab is shown in Figure 40 on page 134.
4. Click the button next to the classifier to be deleted and click Delete.
Only one classifier can be deleted at a time.
The classifier is deleted from the switch.
5. To permanently save your changes, select the Save Config option in
the Configuration menu.