Displaying notify table entries – Allied Telesis AT-S63 User Manual
Page 263
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3
263
The SNMPv3 SecurityToGroup Table tab is shown in Figure 104.
Figure 104. SNMPv3 SecurityToGroup Table Tab (Monitoring)
Displaying Notify
Table Entries
To display entries in the SNMPv3 Notify Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 38.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 100 on page 259.
3. In the SNMPv3 section, click the button next to View Notify Table and
then click View at the bottom of the tab.
Advertising