Metrohm tiBase 1.1 - Manual (Page 109)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Configuration
tiBase 1.1
￭￭￭￭￭￭￭￭ 101
Selection Day(s) | Week(s) | Month(s) | Year(s)
Default value Month(s)
Backup directory
Selection of a predefined backup directory (see Chapter 3.2.3.2.1, page
93).
Note
Make sure that you have read and write permission for the selected
directory.
3.3.2.2 Backing up configuration data manually
Dialog window: Configuration ▶ File ▶ Save ▶ Manually ▶ Backup configuration
data manually
Backup target
Backup directory
Selection of a predefined backup directory (see Chapter 3.2.3.2.1, page
93).
Note
Make sure that you have read and write permission for the selected
directory.
Backup name
Selection of an already existing name or entry of a new name for the
backup file. If an existing backup file is selected, it will be overwritten.
Entry 50 characters
Selection Backup names
Note
If the backup directory is located on a network drive, then the backup
date should be added to the Backup name, because the backup date
information is not available when the directory is restored.
[Start]
Start the manual backup of the complete configuration database.