Metrohm tiBase 1.1 - Manual (Page 238)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
230 ￭￭￭￭￭￭￭￭
tiBase 1.1
Note
If a variable is modified, then with [Recalculate] all the selected deter-
minations will be recalculated with the new value. If one variable is not
modified then when several determinations are recalculated the original
value of the variable will be used (i.e. variables with the same name but
different values will not be overwritten until they are deliberately modi-
fied).
4.5.2.6.4.3 Modifications - Calculations
Tab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Modifica-
tions ▶ Calculations
Table with calculations
The table contains details on the calculations.
Result variable
Variable, which is automically generated by the program during the evalu-
ation or by the results defined by the user.
Result name
Name of the result. This name will be shown in the result view as well as
in the report. The result name can be used in further calculations as varia-
ble RS.Result name.VAL.
Formula
Calculation formula which can be generated after pressing in the for-
mula editor.
Formula lines can be deleted according to normal rules ([Delete]), copied
([Ctrl+C]), cut ([Ctrl+x]) and be pasted ([Ctrl+v])
Entry 1000 characters
Default value empty
Unit
Unit of the result for the output (text only). The unit can be used in further
calculations as variable 'RS.Result name.UNI'.
Entry 16 characters
Default value empty
Decimal places
Number of decimal places for the output of the calculated result. This
parameter is ignored for results of the type text or date/time.