Metrohm tiBase 1.1 - Manual (Page 237)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 229
￭ Curve evaluation
Manual modification of the curve evaluation.
The tab Curve evaluation is only shown when a single determination
is selected that contains curves that can be evaluated.
4.5.2.6.4.2 Modifications - Variables
Tab: Database ▶ Determination overview ▶ Determinations ▶ Reproc-
ess... ▶ Reprocessing ▶ Modifications ▶ Variables
On the tab Variables the variables used in the determination can be
modified.
Variable table
The variable table shows those variables used that are present in all the
selected determinations and cannot be edited directly. With a click on the
column title (columns Variable, Value) the table can be sorted according
to the selected column in increasing or decreasing order.
Variable
Shows the name of the variable. Only the those variables are displayed
which are available in all the selected determinations and can be edited.
These include: the method variables FCT (factor) and DIV (divisor), the
sample data variables C00 (sample size), ID1 and ID2 (sample identifica-
tion, the common variables CV01 to CV25 as well as the following com-
mand variables:
￭ 1M.TITER
Titer value of the solution used in the command.
￭ 1M.CONC
Concentration of the solution used in the command.
Value
Display of the variable value. If a fixed value is defined for a variable, the
value will be presented in italics.
[Modify]
Open the dialog window Modify variable to modify the value of an
existing variable.