Metrohm tiBase 1.1 - Manual (Page 263)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 255
[Print (PDF)]
Opens the Print control chart (PDF) (see Chapter 4.5.2.19, page 256)
dialog window. The content of the control chart can be shown as a PDF
file in the required format.
4.5.2.17 Determinations - Overlay curves
Menu item: Database ▶ Determinations ▶ Overlay curves… ▶ Overlay curves
The Determinations, Overlay curves… menu item or the symbol
opens the Overlay curves dialog window, in which overlaid curves of the
selected determinations are shown according to the loaded template.
Template
Selection of a saved template for showing overlaying curves.
Selection Standard | "Template" | Last saved template
Default value Last saved template
If a new template is selected then the display will be
updated automatically.
Note
The Command type for which the overlaying of curves is possible is
defined in the template. Curves from the selected determinations can
only be overlaid when the determination method contains a command
with this Command type (e.g. DET).
Command name
Selection of the command whose curves are to be displayed with the
selected template.
Selection "Command"
This selection is only necessary if the method con-
tains several commands of the same Command
type.
[Templates]
Opens the Curve overlay templates dialog window.
Graph display
Shows the curves according to the settings of the selected template. The
command type (e.g. DET pH) is shown centrally above the graph. At the
right of the curve the legend is shown with the line number in the deter-
mination table belonging to the determination.