Metrohm tiBase 1.1 - Manual (Page 327)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 How to proceed?
tiBase 1.1
￭￭￭￭￭￭￭￭ 319
4 Select or enter the name for the Backup file. If an existing backup
file is selected, it will be overwritten.
Note
If the backup directory is on a network drive, the backup date
should be added manually to the Backup name because the
backup date information is not available when the data is restored.
5 Click on [Start].
The manual backup is started and the configuration database is
backed up to the selected directory.
Backing up configuration data automatically
1 Select Configuration program part.
2 Click on the File ▶ Backup ▶ Automatically menu item.
The Backup configuration data automatically dialog window
opens.
3 Activate the Automatic backup check box.
4 Enter an Interval for backup monitoring or a date for the Next
backup.
5 Select a directory for the backup in the Backup directory field.
6 Click on [OK].
The Backup configuration data automatically dialog window
closes.
The configuration database is automatically saved in the selected
directory at the desired time.