Metrohm tiBase 1.1 - Manual (Page 89)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Configuration
tiBase 1.1
￭￭￭￭￭￭￭￭ 81
Note
Deleting user groups is only possible if the group no longer contains
any users.
3.2.1.3 User
3.2.1.3.1 User - Details
Dialog window: Configuration ▶ Tools ▶ User administration
If a user group is selected in the left-hand side of the User administra-
tion dialog window, then the details of this user will be shown on the
right-hand side.
User
Display of the short name of the user that must be entered in the User
field at the time of log in. This name is defined when a new user is created
and cannot be subsequently modified.
Entry 24 characters
Full name
Full name of the user.
Entry 256 characters
Status
Display of the current status of the user. Only users of the Administra-
tors group can modify the status.
Selection enabled | disabled | removed
enabled
Users with enabled status can log in as usual. An exception is the first
login after the change of status from disabled or removed to ena-
bled. If this is the case, then a start password must be assigned with
which the user can log in again.
disabled
Users with disabled status can no longer log in. They will be automati-
cally set to this status as soon as the number of login attempts defined
in the Security settings has been exceeded.