Metrohm tiBase 1.1 - Manual (Page 29)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiBase 1.1
￭￭￭￭￭￭￭￭ 21
Name Syntax Description
System vari-
ables 'SV.Variable
identification' System variables are general varia-
bles which are adopted in the
determination at the start of the
determination.
Common
variables 'CV.Name' Common variables are global varia-
bles. Depending on the device, the
names are set or can be defined by
the user.
Enter variables
Variables must always be entered and ended with an apostrophe ' (e.g.
'MV.myVariable').
Note
When using variables, always observe their data type (Number, Text
or Date/Time).
2.4.3.2 Method variables
Tab: Database ▶ Determinations ▶ Reprocessing ▶ Variables
Method variables include the variables FCT (factor) and DIV (divisor).
Syntax
'MV.Variable name'
Examples: 'MV.FCT' and 'MV.DIV'
Occurence
These two variables occur in the formula saved in the 870 KF Titrino plus.
By modifying these variables the result can be indicated as different con-
centration units (mg/mL, ppm etc.).
Method variables
Variable
name Description Data type
FCT Conversion factor for the calculation for-
mula Number
DIV Divisor for the calculation formula Number