Metrohm tiBase 1.1 User Manual
Page 292
4.8 Curves subwindow
■■■■■■■■■■■■■■■■■■■■■■
284
■■■■■■■■
tiBase 1.1
For BRC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value
Amount [µg]
For MEAS commands
Selection
Time [s] | Measured value | dMW/dt | Temper-
ature [°C] | Calculated 1...3 | External 1...3
Default value
Measured value
Label
Freely definable axis label for the y1 axis. With auto the designation from
the field Size will be used.
Selection
50 characters | auto
Default value
auto
Scaling
Start value
Initial value for scaling the y1 axis.
Only editable when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value
0
End value
End value for scaling the y1 axis.
Only editable when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value
1000
Curve
Curve color
Selection of the color for the curve line.
Selection
13 colors | blue
Default value
blue
Symbol
Selection of the symbol for the display of the individual measuring points.