Metrohm tiBase 1.1 - Manual (Page 170)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
162 ￭￭￭￭￭￭￭￭
tiBase 1.1
4.4.1.4.3.8 Report template - Group field
Program window: Database ▶ Report template
A group field is for the purpose of grouping together a variety of fields in
the report template. All of the fields gathered together in a group field
can be moved together as a group. The group field prevents a page break
inside the group field.
The group field always extends across the entire width of a page; only the
upper edge (Y value) and the height of the field can be configured.
Note
The following fields, which do not permit page break controls, cannot
be inserted into a group field.
￭ Fixed report
￭ Curve
￭ Calibration curve
Insert
In order to insert group field into a report template the corresponding
symbol must be selected on the Module bar and placed on the report
template by creating a field with the left-hand mouse key.
Properties
X pos.
Shows the predefined x-position for the field.
Y pos.
y-position within the permitted section.
Input range 0.0000 - (max. page height) mm
Width
Shows the predefined width of the fixed report.
Height
Height of the field
Input range 0.0000 - (max. page height) mm