Metrohm tiBase 1.1 - Manual (Page 178)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
170 ￭￭￭￭￭￭￭￭
tiBase 1.1
4.4.2.2 Edit curve overlay templates
4.4.2.2.1 Curve overlay - Properties
Dialog window: Database ▶ Tools ▶ Templates ▶ Curve overlay tem-
plates... ▶ Curve overlay templates ▶ [Properties] ▶ Properties - Overlay curves -
'Name'
Template name
Name for the curve overlay template which is saved in the configuration
database per client.
Entry 50 characters
Command type
Selection of the command type from which curves are to be overlaid.
Selection DET pH | DET U | DET Ipol | DET Upol | MET
pH | MET U | MET Ipol | MET Upol | SET pH |
SET U | SET Ipol | SET Upol | STAT pH | STAT
U | DOS pH | DOS U | KFT Ipol | KFT Upol |
KFC | BRC | MEAS pH | MEAS U | MEAS Ipol |
MEAS Upol | MEAS T | MEAS Conc | MEAS
Cond | CAL MEAS pH | CAL MEAS Conc | CAL
Cond
Default value DET pH
Autoscaling
on | off (Default value: on)
If this check box is activated, then the. In this case the fields Start value
and End value cannot be edited.
Tabs
Further properties of a template for the overlaying of curves can be set on
the following 4 tabs:
￭ x axis
Parameters for the graphical display of the overlaid curves on the x
axis.
￭ y axis
Parameters for the graphical display of the overlaid curves on the y
axis.
￭ Options
Options for the graphical display of the overlaid curves.
￭ Comment
Enter comment on the template.