Metrohm tiBase 1.1 - Manual (Page 315)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 How to proceed?
tiBase 1.1
￭￭￭￭￭￭￭￭ 307
5 Click on [Recalculate].
The selected determinations are recalculated. The results of this recal-
culation are entered automatically in the Result view subwindow.
6 If desired, save the modified method with [Save As…] under the
same name or under a new name.
If the modified method is saved under the name of an existing
method then all the earlier method versions will be deleted and a
new version with the number 1 will be generated.
7 In the Reprocessing dialog window, click on [OK].
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and
the Reprocessing dialog window will be closed. This button is disa-
bled for as long as recalculating has not yet been triggered and if not
all of the selected determinations could have been recalculated.
Changing statistics
Note
The Statistics tab will only be shown when the last determination (and
only this one) is selected from a set of determinations which belong
together because of the statistics defined in the method.
1 Change to the Statistics tab.
2 In the Result name field, select the result whose Result value is to
be displayed.
3 Select desired determination whose result value(s) should be
switched on or off for the statistics.
4 If only the selected result of the determination is to be switched on
or off for the statistics, click on [Result on/off].
If the result is switched off, an asterisk (*) appears after the result
value; if it is switched on again, the asterisk disappears.