Metrohm tiBase 1.1 - Manual (Page 255)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 247
Record message
If this option is selected, the message "The limit value for the result 're-
sult name' has been exceeded." is saved in the determination.
4.5.2.6.5 Result view
Subwindow: Database ▶ Determinations ▶ Reprocess… ▶ Reprocessing ▶ Result
view
In the Result view subwindow of the Reprocessing dialog window,
results and raw data are displayed on the following two tabs:
4.5.2.6.5.1 Result view - Results overview
Tab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Result
view ▶ Result overview
On the Result view tab of the Result display subwindow the results
calculated in the calculating commands and the variables used for this are
displayed and updated with each recalculation.
The following elements are displayed:
Title
Name of the calculation command (1C - 9C).
Result
Result name, result value with defined number of decimal places, result
unit.
Statistical evaluations
Results of the statistical evaluation (mean value, absolute and relative
standard deviations, number of measured values used for the statistics).
Navigation
If several determinations are selected for reprocessing, the navigation but-
tons can be used to switch between the result view of the individual
determinations:
Jump to the first determination.
Jump to the previous determination.
Jump to the next determination.
Jump to the last determination.