Metrohm tiBase 1.1 User Manual
Page 207
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭
199
<<RowDesc val="" />
Column header for buffers/standards.
<NominalVal val="" />
Column header for nominal value.
<MeasVal val="" />
Column header for measured value.
<CalTemp val="" />
Column header for calibration temperature.
<CalDur val="" />
Column header for duration of measurement.
<header>
– <body dynamic="">
– <data>
<RowDesc> ... </RowDesc>
Buffer/Standard.
<NominalVal> ... </NominalVal>
Nominal value.
<MeasVal> ... </MeasVal>
Measured value.
<CalTemp> ... </CalTemp>
Calibration temperature.
<CalDur> ... </CalDur>
Duration of measurement in s.
</data>
</body>
</CalibrationTable>
</CalibData>
– <StdAddData>
Standard addition data
<slope val="" />
Calculated slope of the standard addition curve.
<e0 val="" />
Calculated axis intercept of the standard addition curve.
<ion val="" />
Ion (Valency).
<conc val="" />
Calculated valency.
<concUnit val="" />
Concentration unit.
<variance val="" />
Variance.
– <StdAddTable>
Standard addition solutions.
– <header>
Column headers.
<RowDesc val="" />
Column header for measuring solution.
<dV val="" />
Column header for addition volume.
<MeasVal val="" />
Column header for measured value.
<dU val="" />
Column header for measured value differential.
<Dur val="" />
Column header for duration of measurement.
</header>