Metrohm tiBase 1.1 - Manual (Page 260)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
252 ￭￭￭￭￭￭￭￭
tiBase 1.1
All filtered determinations
If this option is selected, then the reports will be produced for all the
determinations in the determination table that meet the filter criterion.
Report type
Selection
Original report(s) | Report template
Default value Original report(s)
Original report(s)
If this option is selected then the reports produced during the determi-
nation will appear at the Output target defined below.
Report template
If this option is selected then reports according to the selected Report
template will be produced at the Output target defined below.
Note
Original report is used to refer to a report, which has been automati-
cally generated at the creation of the determination version. If a
determination is being reprocessed, a new determination version and
therefore also a new original report is created.
In order to print the report of the non-reprocessed determination the
determination 1 must be selected.
Output target
Printer
on | off (Default value: on)
If this check box is activated, the reports are printed on the selected
printer.
PDF file
on | off (Default value: off)
If this check box is activated the reports are put out as PDF files under the
entered file name.
Note
If several reports are produced simultaneously as a PDF file then an
index will be automatically appended to the file name.