Metrohm tiBase 1.1 - Manual (Page 111)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Configuration
tiBase 1.1
￭￭￭￭￭￭￭￭ 103
￭ Save
Saves settings on exiting the program.
￭ PDF
Settings for PDF files.
3.3.3.2 Options - General
Tab: Configuration ▶ Tools ▶ Options ▶ Options ▶ General
Dialog language
Dialog language
Selection of the dialog language.
Selection German | English | additional languages
(dependent on installed language patches)
Default value English
Note
For the altered setting to become effective the program must be restar-
ted.
3.3.3.3 Options - Save
Tab: Configuration ▶ Tools ▶ Options ▶ Options ▶ Save
Save on exiting
Here you can define the settings to be saved when the program is exited.
If the corresponding check box is activated, the current view with its set-
tings will be saved automatically when the program is exited. If the corre-
sponding check box is deactivated, then any modifications that may
have been made to the view will not be saved and at the next program
start the original, manually saved view will be loaded.
Configuration settings
on | off (Default value: off)
Switches Save configuration view on/off when exiting the program.
Database settings
on | off (Default value: off)
Switches Save database view on/off when exiting the program.