Metrohm tiBase 1.1 - Manual (Page 94)

3.2 Administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
86 ￭￭￭￭￭￭￭￭
tiBase 1.1
Note
For Windows 2000, proceed as follows for password monitoring by
Windows:
1. Start/execute "secpol.msc".
2. Under "Local Policies/User Rights Assignment", activate the "Act as
part of the operating system" policy for all desired user groups.
3. Restart the computer.
Maximum number of login attempts
If this check box is activated, then a user will be set to the disabled sta-
tus as soon as the number of login attempts defined here has been excee-
ded. A user with the disabled status can no longer log in. The counter for
the login attempts is reset for the respective user once he or she has log-
ged in successfully.
Selection on | off
Default value off
Recommended setting: on (can no longer be edi-
ted)
Input range 2 - 5
Default value 3
Recommended setting: 3
Message by e-mail
If this check box is activated, then an e-mail will be sent to the address
defined under [E-mail...] as soon as the defined number of login
attempts has been exceeded.
If no definition of the e-mail parameters has been entered, the [E-mail...]
dialog will be opened when the check box is activated.
Selection on | off
Default value off
Recommended setting: off
[E-mail...]
This button opens the Send e-mail window (see Chapter 3.2.2.7, page
91) for defining the e-mail parameters.
Logout policies
New login only for same user
If this check box is activated, then only the same user can log in again
after a logout. Users with administrator rights can always log in.