Metrohm tiBase 1.1 - Manual (Page 91)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Configuration
tiBase 1.1
￭￭￭￭￭￭￭￭ 83
User
Short name of the new user that must be used to log in at program start.
After the name has been entered, a Start password must be issued with
which the user is entered in the list of users.
Entry 24 characters
3.2.1.3.3 Setting a start password
Dialog window: Configuration ▶ Tools ▶ User administration ▶ [Set start pass-
word] ▶ Set start password
A start password can be assigned for the selected user with the [Set start
password] button in the User administration dialog window. It is
active only for newly added users or for those who once again have had
their status set to enabled. The Start password dialog window opens.
Start password
Entry of a new start password. Password options are not used for the start
password.
Entry 50 characters
Confirm password
Confirmation of the start password.
Entry 50 characters
3.2.2 Security settings
3.2.2.1 Security settings
Dialog window: Configuration ▶ &Tools ▶ Security settings
Overview
Parameters for login, password protection and electronic signatures can
be configured in the Security settings dialog window.
With client/server systems, the security settings are globally valid for all
connected clients.
Security settings can be exported and imported. This means that these set-
tings can be exchanged between different client/server systems.
The security settings can be output as a PDF file with the &File ▶ &Print
(PDF)... ▶ &Security settings menu item.