Metrohm tiBase 1.1 - Manual (Page 236)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
228 ￭￭￭￭￭￭￭￭
tiBase 1.1
[OK]
Close the Reprocessing dialog window. Each determination that has
been modified by reprocessing will be saved as a new version with a ver-
sion number increased by +1.
This button is disabled for as long as reprocessing has not yet been trig-
gered and if not all of the selected determinations were able to have been
recalculated.
[Cancel] or
Close the Reprocessing dialog window. The result of the reprocessing
made since the last saving will not be saved.
Note
If the Comment on modification of determinations option is ena-
bled under Configuration
▶ Tools ▶ Security settings ▶ Audit
Trail/Modifications, the Modification comment determination
dialog window is displayed before saving.
4.5.2.6.3 Recalculation rules
Dialog window: Reprocessing
The following rule applies for recalculating the selected and modified
determinations:
With measuring commands (DET, MET, SET, KFT, KFC, BRC, MEAS, CAL
MEAS) only the evaluations with existing data will be recalculated. All
other parameters will be ignored.
4.5.2.6.4 Modifications
4.5.2.6.4.1 Modifications - Overview
Subwindow: Database ▶ Determination overview ▶ Determinations ▶ Reproc-
ess... ▶ Reprocessing ▶ Modifications
In the subwindow Modifications of the dialog window Reprocessing
modifications can be made on the following 4 tabs:
￭ Variables
Modification of the variables used in the selected determination.
￭ Calculations
Selected determinations will be recalculated.
￭ Statistics
Modification of statistics data.
The tab Statistics will only be shown when the last determination
(and only this one) is selected from a set of determinations which,
because of the statistics defined in the method, belong together.