Metrohm tiBase 1.1 - Manual (Page 34)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26 ￭￭￭￭￭￭￭￭
tiBase 1.1
Variable
name
(PC-Control)
Variable
name
( tiBase 1.1)
Description Command
.FD# .FP{x}.TIM Time for fixed endpoint x (1…9)
in s DET, MET, SET, KFT, KFC,
STAT, MEAS (without T/
Flow)
.FP# .FP{x}.[VOL] Volume for the fixed endpoint x
(1...9) in mL DET, MET, SET, KFT, STAT
.HM# .HP{x}.MEA Measured value for HNP x (1...9)
in mV
1)
DET, MET
.HT# .HP{x}.TEM Temperature for HNP x (1...9) in
°C DET, MET
.HD# .HP{x}.TIM Time for HNP x (1...9) in s DET, MET
.HP# .HP{x}.[VOL] Volume for HNP (half neutraliza-
tion potential) x (1...9) in mL DET, MET
#M.MIM .IME Initial measured value (measured
value before start conditions are
processed) in the unit of the
measured value (number) DET, MET, SET, KFT, STAT,
MEAS, CAL MEAS,
STDADD, DOS
.MIT .ITE Initial temperature (temperature
before start conditions are pro-
cessed) in °C DET, MET, SET, KFT, STAT,
MEAS (without T/Flow),
CAL MEAS, STDADD, DOS
.XAM .MA.MEA Maximum measured value in the
unit of the measured value DET, MET, SET, KFT, STAT,
MEAS
.XAT .MA.TEM Temperature for the maximum
measured value in °C DET, MET, SET, KFT, STAT,
MEAS
.XAD .MA.TIM Time for the maximum measured
value in s DET, MET, SET, KFT, STAT,
MEAS
.XAP .MA.[VOL] Volume with maximum meas-
ured value in mL DET, MET, SET, KFT, STAT
.MI.GFL Minimum gas flow rate in
mL/min MEAS T/Flow
.XIM .MI.MEA Minimum measured value in the
unit of the measured value DET, MET, SET, KFT, STAT,
MEAS
.XIT .MI.TEM Temperature for minimum meas-
ured value in °C DET, MET, SET, KFT, STAT,
MEAS
.XID .MI.TIM Time for the minimum measured
value in s DET, MET, SET, KFT, STAT,
MEAS
.XIP .MI.[VOL] Volume for minimum measured
value in mL DET, MET, SET, KFT, STAT
.RMC .MR.MRC Correlation coefficient for mean
dosing rate for the whole range STAT, DOS