Metrohm tiBase 1.1 - Manual (Page 288)

4.8 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
280 ￭￭￭￭￭￭￭￭
tiBase 1.1
Note
When a new determination is selected the complete curve is always
shown, i.e. the zoom range is not retained when the determination is
changed.
Curves can be copied to the clipboard with the context-sensitive Copy
graphics menu command.
4.8.2 Curves - Measuring point list
Subwindow: Database ▶ Curves
The context-sensitive Measuring point list… menu item in the curve
window opens the Measuring point list - 'Command name.#' dialog
window for showing the measuring point list for the selected curve.
The display of the measuring points in the table can be defined per win-
dow and per command type in the Properties - Curve #.
4.8.3 Properties
4.8.3.1 Curve properties - Overview
Dialog window: Database ▶ Curves ▶ Properties curves #
The properties for the display of curves can be set on the following 5 tabs:
￭ x axis
Parameters for the graphical display of the curves on the x axis.
￭ y1 axis
Parameters for the graphical display of the curves on the y1 axis (left-
hand y axis).
￭ y2 axis
Parameters for the graphical display of the curves on the y2 axis (right-
hand y axis).
￭ Options
Options for graphical display of curves.
￭ Measuring point list
Parameters for showing the measuring point list.
4.8.3.2 Curve properties - x axis
Dialog window: Database ▶ Curves ▶ Properties curves # ▶ x axis
Parameters for the graphical display of the curves on the x axis.
Command type
Selection of the command type for which the curve properties are to be
defined. The curve properties defined for each command type are saved
per curve window and per client.