Metrohm tiBase 1.1 - Manual (Page 169)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 161
Properties
X pos.
Shows the predefined x-position for the fixed report.
Y pos.
Y position within the permitted section.
Input range 0.0000 - (max. page height) mm
Width
Shows the predefined width of the fixed report.
Height
Height of fixed report.
Input range 0.0000 - (max. page height) mm
Fixed report
Selection of a predefined fixed report.
Selection Calculations | Calibration data | Curves | Mes-
sages | List of meas. points | Result list | Raw
data (endpoints) | Standard addition | Statis-
tics data (brief) | Statistics data (full) | Signa-
ture list Determination | Signature list
Method | Variables | Devices used | Common
variables used | Solutions used | Sensors used
Default value Calculations
Command name
Name of the command for which a curve, a calibration curve or a measur-
ing point list is to be produced. With not defined, the lists for all curves
present in the determination will be produced as default.
This parameter appears only as editable field when Fixed report =
Curve, Calibration curve or Measuring point list.
Entry 50 characters
Selection not defined
Default value not defined