Metrohm tiBase 1.1 - Manual (Page 227)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 219
Note
The filters are saved globally in the configuration database and are
therefore available for all clients.
4.5.2.4.8 Determinations - Editing the filter criterion
Dialog window: Database ▶ Determinations ▶ Filter ▶ Special filter ▶ Special filter
- Database "Database name" ▶ [Edit] ▶ Edit line ▶ Edit filter criterion 'Filter
name'
The Edit ▶ Edit line command in the Special filter - Database "Data-
base name" dialog window opens the Edit filter criterion # dialog
window, in which the filter criterion selected in the filter table can be edi-
ted.
Link
Selection of the type of link (logical operator) with the preceding filter cri-
terion.
Selection AND | OR
Default value AND
AND
Logical "AND" link.
OR
Logical "OR" link.
Field
Selection of the data field for which a criterion is to be formulated.
Selection 'Field name'
Filtering is carried out only for the selected field. The
10 most recently selected fields are always available
for selection.
[Other…]
Open the Filter - Field selection dialog window. Herein all fields that
can be used for filtering are listed in tree form. A field can be included by
highlighting it and closing the dialog window with [OK].
Details
Depending on the data field, further list boxes are dynamically created
under Details in order to be able to select the desired property.