Metrohm 861 Advanced Compact IC - Manual (Page 18)

1 Introduction
861 Advanced Compact IC / Instructions for Use 8.861.1033
8
27 Sample loop
20 µ L PEEK sample loop 6.1825.210
28 Injection valve
29 Aspirating tubing
for sample;
PTFE-tubing 6.1803.020,
length L = 52 cm
30 Connection capillary to syringe
6.1803.020 PTFE tubing,
length L = 30 cm
31 PEEK coupling (6.2744.040)
32 Leak detector
33 Connection capillary
6.1831.010 PEEK capillary,
length L = 13 cm
34 Filter unit PEEK (6.2821.120)
35 Connection capillary
6.1831.010 PEEK capillary,
length L = 13 cm
36 Connection capillary
6.1831.010 PEEK capillary,
length L = 15 cm
37 Purge valve
38 Aspirating capillary
Connection for 6.1834.010 aspirating
tubing
39 Connection capillary
Connection pump head – purge
valve, fixed mounting
40 Pump head (6.2824.100)
41 Mounting rail
for cartridge holder
42 Fastening screws
for pump head 40
43 Connection capillary
in pump head, fixed mounting
44 Inlet capillary for detector block
PEEK capillary, fixed mounting
45 Detector block (1.732.0110)
46 Suppressor module «MSM II»
(inlet and outlet capillaries are not
shown)
47 Tubing cartridge (6.2755.000)
for 6.1826.110 pump tubing
48 Contact pressure lever
for adjusting the contact pressure
49 Holding clamp
for locking the tubing cartridge into
place
50 Snap-action lever
for releasing the tubing cartridge
51 Pump drive
roller head with contact rollers
52 Mounting pin
for attaching the tubing cartridges