Metrohm 861 Advanced Compact IC - Manual (Page 72)

3 Operation
861 Advanced Compact IC / Instructions for Use 8.861.1033
62
Links
The Links tab in the window for the system settings serves to select and
set the COM port (for details see Software Instructions for Use «IC Net
2.3», Section 5.2.4 Links).
3.3.2 Hardware settings
Selection of the Hardware menu item using the right mouse button
opens the hardware settings window consisting of the three tabs Hard-
ware , Outputs and Alarm stops .
Hardware
This tab of the hardware settings window defines general parameters
which are set automatically at power on of the instrument.
Remote lines after power on
The remote output lines 1 … 8 are set to
these values after power on or a manual
stop with
Shutdown hardware
.
Selection: 0 , 1