Metrohm 861 Advanced Compact IC - Manual (Page 75)

3.3 Settings
861 Advanced Compact IC / Instructions for Use 8.861.1033
65
Alarm stops
The Alarm stops tab of the hardware settings window defines the events
for which the instrument is stopped immediately. At an alarm stop, high-
pressure pump and peristaltic pump are stopped immediately, the run-
ning determination and the active sample queue are also stopped.
Event Events for alarm stop:
Pump stop Pump stopped because pressure limits are ex-
ceeded.
Hardware error Hardware error detected at the 861 Advanced
Compact IC (high-pressure pump, injection
valve, or suppressor not working correctly).
Leak Leak detector has detected solvent in the in-
strument’s interior. This information is also
stored in the instrument itself, so that it is
stopped automatically even without connection
to the PC.
Power on Temporary power failure at the 861 Advanced
Compact IC hardware.