Metrohm NIRS XDS MasterLab Analyzer User Manual
Page 113
Advertising
▪▪▪▪▪▪▪
111
If Vision displays the Instrument
Configuration screen again, click “OK to
accept the instrument identification.
Vision briefly displays a dialog box which indicates that the instrument reference is being placed into
position. In reflectance, this is automatic. No user action is required.
The status bar indicates scan progress.
Vision requests that the Certified 80%
Reflectance Reference Standard be placed in
the sampling area.
Place the standard as shown, with the
identifying label parallel to the long axis of
the tray.
Close the cover, and click on “OK”.
Advertising