Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 62)

60 ▪▪▪▪▪▪▪
Highlight the Sample ID fields to be pasted as shown above. Click on the “Paste” button in the dialog
box. (It is outlined in red below.)
The Sample ID names are pasted into the column, as shown. In this case only five names were
pasted, for clarity. The entire column may be pasted, up to the limit of the vial positions.
Entry Method #5:
The user may use the right-click copy and paste method, as illustrated below:
This uses the Windows convention for pasting. Highlight the information to be copied, right-click,
and select “Copy”. Move the cursor to the destination field, right-click, and select “Paste”. The
information will be pasted into the field as desired.