Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 59)

▪▪▪▪▪▪▪ 57
Also note that 20 vials are shown, in a
4 x 5 configuration. This came from the
Select Tray Dialog box. (It is shown at
right, as a reminder.)
6.2.1 Sample ID Entry
There are several ways to enter the Sample ID:
Entry Method 1:
Right-click on the circle that represents the vial position. The circle turns yellow (It is shown with a
circle here, for clarity in “black and white”.)
The “Edit” box appears as shown. Click on “Edit”, then type the sample name into the vial position.
Press “Enter”. The Sample ID will also be shown in the table at right, as shown below:
Vision fills in the “Order” column, in the entry sequence of sample ID. Note the “1” in the Order
column. Another sample name is filled in as shown below:
Continue to enter sample names in this manner, until all 20 positions are filled. Note that the vial
positions become yellow when active, and the sampling order is incremented in the “Order” column.
Do not click on the vial position and turn it white – that removes it from the “Order” column, and de-
activates sampling on that vial.