Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 21)

▪▪▪▪▪▪▪ 19
Network Solution 4:
Verify that the Firewall on the
computer has Vision loaded as
an “exception”.
This is located under “Control
Panel”, “Windows Firewall”.
If this is not enabled, click “Add
Program” and select “Vision”
from the list.
When finished, click “OK”
Network Retry, XP and
Vista:
Windows XP and Vista
users should click on
“Retry Only”. This
command resets the
communication port, and
allows Vision to “find” the
instrument, if connected
properly.
Network Retry,
Windows 2000:
Windows 2000 users
should click on
“Retry/Reset”. This
command resets the
communication port, and
also resets Windows 2000
to the proper state to
connect using a dynamic
IP address in the XDS
instrument.