Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 23)

▪▪▪▪▪▪▪ 21
4
Assembly of the Instrument
The XDS Analyzer will be assembled and installed by a trained representative of Metrohm. This
person will perform a full suite of diagnostics to verify correct operation, and will explain basic
operating points. Assembly information is given as a guide for the user, should re-assembly ever be
required due to an instrument move or for other reasons.
Verify that the following items have been received in good condition:
• Metrohm XDS Monochromator
• MasterLab (Tablet) module
• Universal Tablet Tray and RCM Iris (not shown)
• Vision Spectral Analysis Software (Vision Software and Manual are on CD)
• Spare Lamp
• Accessory Kit, containing cords, cables, required items, and small parts
• Safety Manual for CE certification
• Instrument Test Results Packet
*(packaging of some items may vary slightly)
The serial number of the instrument and module are located on serial plates on the left side, when
facing the instrument. These serial numbers should match the serial numbers marked on the shipping
papers.
When using Vision software, the software will automatically read the monochromator and module
serial number. Serial number plates are located on the left side of the items, if verification is required.
Follow the assembly sequence that begins on the next page: