Metrohm NIRS XDS MasterLab Analyzer User Manual
Page 93
▪▪▪▪▪▪▪
91
Vision asks the user to select the Standard File.
This file is on the mini-CD, as shown.
This file may be copied into the C:\Vision
directory for convenience.
The user is prompted to insert the Tablet
Transmission Standard Tray.
Place the tray in the instrument as shown, or
verify that it is already in place.
Close the cover and click “OK” to proceed.
Vision begins a scan of the reference.
When the reference scan is finished, Vision
prompts for the wavelength standard. Click “OK”.
After the test is complete, a spectrum of the standard is shown in the upper right quadrant of the
screen. A tabular report is shown in the lower right quadrant, giving each peak, its nominal position
and its measured position. A typical screen is shown (right side expanded for ease of viewing):