Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 53)

▪▪▪▪▪▪▪ 51
If the user clicks on “Modify/
View” from the Select Tray Dialog
box, this screen is shown.
If “New” is clicked, all fields are
blank, for entry of vial
information.
Click “OK” to save and exit.
(In this example, the 15mm vial will be used. See section 5.2, on Creation of a Custom Vial Size
creation for details on setting up a custom vial size. Please continue to Acquire, Connect.)
Select Acquire, Connect to initiate communication
with the instrument.
Upon successful connection, the amber LED (top
middle) will illuminate to indicate that
communication with the instrument has been
established.
Vision requests that a Data Collection Method (DCM) be
selected for communication with the instrument.
The DCM sets important parameters for how the data is
taken, and assures consistent methods.
There are no Data Collection Methods available because
this is a new project. Click “New” to establish a new Data
Collection Method.
In this case a “Reflectance” Data Collection Method will
be established. (The steps are similar for tablet
transmission; however the “Detector” selection would be
“Transmission” instead of “Reflectance”.