Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 51)

▪▪▪▪▪▪▪ 49
This box directs the user to
select the instrument IP
(Internet Protocol) address.
Use the drop-down arrow of
the IP Address box, and
select the correct
instrument. The instrument
must show “Available” to be
selected.
Click “OK” to exit the dialog box, then “OK” again to exit Configure Data Sources.
Vision prompts the user to connect to the
instrument. Before connection, we wish to figure
the “Project Options”.
Click on “View Spectra”. The user is returned to the
main screen of Vision.
Select Configure, Options from the menu bar.