Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 97)

▪▪▪▪▪▪▪ 95
Vision requests a “Standard File”. For
Photometric Test, use the TSSVxxxx.da file
stored in the Vision directory. This file was
created during IPV Setup. Current
photometric readings will be compared to
that initial file.
You may need to change the file type to
display the file, as shown. Click on the
TSSVxxxx.da file as shown. (The serial number
will be different, of course.) Click “Open”.
Do not use the file on the standards mini-CD
for Photometric Test, as it will cause Vision to
return an error message.
Vision guides the user to the correct
type of file name for this test.
Click on “OK”.
Vision requests a tolerance file. The tolerance
file was loaded in the C:\Vision directory, and
is an “XDA” formatted file.
Select this file and click “Open”.