Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 63)

▪▪▪▪▪▪▪ 61
There is a field for comments beside each
sample. To see this field, click the small arrow
at the bottom right, and the field will be visible.
Alternatively, use the “Tab” key. Start on the
Sample ID, Product ID, or Order, and tab over
to the “Comments” field.
Enter comments, if applicable. No entry is
required; this field is optional. The field is
shown here.
To remove all entries from the Vial Dialog
screen, click on the “Clear” button, at the lower
left corner of the screen. This will clear the
entire Sample ID column. Click “OK” to close.
If this button was clicked, and was a mistake,
click the “Cancel” button. The Vial Dialog
screen will close. Select Acquire, Select
Channel, verify the product, and the original
screen will be displayed.
To delete only one entry, highlight that entry
and use the “Delete” key on the PC keyboard.