Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 66)

64 ▪▪▪▪▪▪▪
In the example above, the order is out of sequence for samples, 7, 9, and 16. If “Use Order” is left
unchecked, Vision proceeds in order of Sample Number. No action is needed.
However, if the user wishes to set the sequence, the procedure is as follows:
1. Click on each vial position to be changed.
2. Re-click and that vial’s “order” will be sent to the end of the sequence.
3. Because this may be difficult to achieve by setting one vial at a time, click on all vial positions,
to turn them white. Then click on each one, in the order desired. This will set the “Order”
column to the proper sequence.
4. Click on “Use Order” to have Vision follow the designated order.
6.2.3 Additional Vial Dialog Functions
There are several other important functions to be set or used in the Vial Dialog box. They are shown
below, and described in the text that follows.
Starting at the right side:
Samples per Reference: