Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 34)

32 ▪▪▪▪▪▪▪
A “Tray ID” must be assigned.
The normal convention is to
use the diameter, then the
number of vials in a row, and
a column.
You may use your own
naming method, of course.
The shortcut to this screen is
shown below.
In this case, the vial diameter
is 22mm.
Enter “22” for Vial Diameter.
Click on “Number of Vials”.
Vision calculates the
maximum number of vials per
tray. IN this case, 8 may fit on
the tray. Vision fills in the
number of vials per row and
column.
Click “More”.
Upon selection of “More”,
Vision shows key dimensions
of the tray, needed for
fabrication.
Click on “Print Coordinates”
to see additional dimensions.