Controlinx and aprilaire, Controlinx and aprilaire -36 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 106
DigiLinX Dealer Setup Version 2.35.00
5-36
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
5.
Once all scenes have been added, use the up and down arrows located under the menu listing to adjust the
order in which the scenes are presented.
6.
After adjusting information, select Apply.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab for a ControLinX Contained in a MLA4000
on page 5-32.
ControLinX and Aprilaire
To edit ControLinX settings for Aprilaire, complete the following steps:
1.
Connect the ControLinX with the Aprilaire 8811 Protocol Adapter using the DigiLinX RS232 cable
(included). This cable is used with the cables supplied by Aprilaire.
Table 5-20
Menu Tab
Tab
Selection Description
Menu
List of Rooms
Select the room from the list of rooms for the lighting control
buttons to appear on the menu for that room.
Available Scenes
Select the scene and select the right arrow to move the
scene to the room.
<Room>
The name of the room for which you are enabling scenes.