After adjusting information, select apply, Labels tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 178
DigiLinX Dealer Setup Version 2.35.00
5-108
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
8.
Select the down arrow in the Sources: Name: field and select the MediaLinX connected to that source. (see
Figure 5-93).
NOTE:
You must have one MediaLinX per source attached to the Panorama.
9.
Enter labels for the TV IR controls. TV Controls allow you to create button names for buttons that execute
Display IR commands learned into the Panorama.
Figure 5-93
Source buttons
Table 5-75 provides information on the fields available for editing the Labels tab.
10.
After adjusting information, select Apply.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab on page 5-85.
Table 5-75
Labels Tab
Tab
Selection Description
Labels
Displays
The names of the displays assigned to the Panorama.
Sources
The names of the sources assigned to the Panorama.
TV Controls
The TV Controls area allows you to use IR commands that
you have learned into the Panorama for a connected TV. Up
to six IR commands can be entered. Once entered, the
commands are available from a TouchLinX.