Controlinx, Controlinx -84 – ClearOne NetStreams DigiLinX Dealer User Manual

Page 154

Advertising
background image

DigiLinX Dealer Setup Version 2.35.00

5-84

All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams

Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496

3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /

www.netstreams.com.

NOTE:

There is only one hard button (the Audio button) that is currently programmable on the TouchLinX.

3.

Enable or disable the Switch to Lighting Control Panel option:

ˆ

If the option is enabled and no phantom button is assigned to Hard Button 1:

When you select the hard button, you are able to view the lighting control menu on the TouchLinX
without any lighting changes being made.

ˆ

If the option is not enabled and you have assigned a phantom button to Hard Button 1:

When you select the hard button, the lighting control menu does not display on the TouchLinX and
lighting changes are made to the room.

NOTE:

This retains any metadata or other information on the TouchLinX while making lighting changes.

ˆ

If the option is enabled and you have assigned a phantom button to Hard Button 1:

When you select the hard button, the lighting control menu displays on the TouchLinX and lighting
changes are made to the room.

4.

Use the dropdown list beneath Select the Button you want to assign to the Hard Button to select the
phantom button you want the hard button to emulate.

Figure 5-72

Select phantom button

5.

Select Apply.

The hard button on the TouchLinX is now activated with the selected options.

ControLinX

NOTE:

Before editing a ControLinX, verify that you have at least one SpeakerLinX added to your project.

A ControLinX is capable of interfacing with a Lutron RadioRA or HomeWorks, Panorama, GE Concord,
AprilAire, Vantage, Generic Lighting, or Secant system. It can also be configured to work with other serial or IR-
based devices using the General Purpose Driver.

The ControLinX is designed to interface with systems already configured.

NOTE:

Be sure that you have completed configuration of your RadioRA, AprilAire, HomeWorks, GE Concord,
Vantage, Generic Lighting, Secant or other system being hosted by the ControLinX before editing the

Advertising