After adjusting information, select apply, Controlinx ir/rs232 settings tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 158
DigiLinX Dealer Setup Version 2.35.00
5-88
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
The IR/RS232 Settings tab is primarily an informational tab. The screen provides more detailed information
about the RS232 settings used to communicate with the RadioRA system.
Table 5-58 provides information on the fields on the IR/RS232 Settings tab.
5.
After adjusting information, select Apply.
6.
Select the Labels tab.
The Labels tab for the ControLinX hosting a RadioRA displays in the right side of the window (see Figure 5-
70).
Figure 5-75
Labels tab for the ControLinX hosting a RadioRA
The Labels tab is used to provide more descriptive names to the RadioRA phantom buttons. The new
descriptive names are used throughout the DigiLinX Dealer Setup program and are used on the TouchLinX
interface or any browser-based interface.
Table 5-58
ControLinX IR/RS232 Settings Tab
Tab
Selection Description
IR/RS232 Settings
Service Name
A display field used to identify the device name.
Driver
The driver used for the connected device.
Driver File
The driver file used to communicate with the device.
Control Type
Defined by the specific product driver.
Baud Rate
Information provided by the manufacturer of the attached
device.
Data Bits
Information provided by the manufacturer of the attached
device.
Parity
Information provided by the manufacturer of the attached
device.
Stop Bits
Information provided by the manufacturer of the attached
device.