Viewlinx display tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 86
DigiLinX Dealer Setup Version 2.35.00
5-16
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 5-14
ViewLinX Display tab
This screen requires you to enter a label, which will appear in the GUI, and a macro. Building macros is
discussed in Chapter 11.
4.
Select the IR tab.
The IR tab appears as shown in Figure 5-15.
Table 5-9
ViewLinX Display Tab
Tab
Selection Description
Audio/Video
Display Settings
.
Source Name
The name of the source connected to ViewLinX.
Enable Service
Enables or disables the source.
Display Controls
Label
Name appearing on the button that executes the macro.
Macro
Designates the macro associated with the label.