Controlinx and the general purpose driver, Controlinx and the general purpose driver -94 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 164
DigiLinX Dealer Setup Version 2.35.00
5-94
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 5-80
Menu tab for the ControLinX hosting an AprilAire
From the Menu tab, the thermostat is assigned to a room. This is how the user interface knows which
thermostat to display.
Table 5-64 provides information on the fields available for editing the Menu tab.
9.
Once all thermostats have been assigned, select Apply.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab on page 5-85.
ControLinX and the General Purpose Driver
You can control other devices or subsystems using one-way RS232 or IR. To do this, you must first select the
General Purpose Driver.
To edit ControLinX settings for the General Purpose Driver, complete the following steps:
1.
Connect the ControLinX with the external system using the 3.5mm to RS232 cable.
2.
Click on the ControLinX you want to edit in the project.
The Info tab for the ControLinX hosting the external system displays in the right side of the window (see
Figure 5-76).
Table 5-64
Menu Tab
Tab
Selection Description
Menu
Thermostat Name
Choose from the dropdown list next to each item in the table
to assign it a thermostat.