ClearOne NetStreams DigiLinX Dealer User Manual
Page 82
DigiLinX Dealer Setup Version 2.35.00
5-12
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
6.
After adjuisting information on the Source page, select Apply.
7.
Select the Relay tab.
The Relay tab information displays (see Figure 5-10).
Figure 5-10
MediaLinX A/V Relays tab
8.
The Relays tab displays settings for the two relays on the MediaLinX A/V. Relays can be set to Normally
Open, Normally Closed, or None.
9.
After adjusting information on the Relays page, select Apply.
10.
Select the Input tab.
The Input tab displays as shown in Figure 5-11.
Show Presets Macro
If you have selected Tuner as the Source Type, you can
attach a macro to any one of the Tuner Presets. Refer to IR
Tools on page 7-1.
This button is grayed out for XM Tuner and the Parasound
ZTuner because no macros are required in RS232
connections.
Table 5-6
MediaLinX A/V Source Tab
Tab
Selection Description