After adjusting information, select apply, Mla4000 input sensor tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 98
DigiLinX Dealer Setup Version 2.35.00
5-28
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
NOTE:
If using an ELK-930, set the Sensor Trigger Level to Signal Toggles, and set the Action to the desired
amount of time.
3.
After adjusting information, select Apply.
1.
Select the Relays tab.
The Relays tab information displays (see Figure 5-24).
Figure 5-24
MediaLinX 4000 Relays tab
Table 5-15
MLA4000 Input Sensor Tab
Tab
Selection Description
Input Sensor
Input 1 Sensor Trigger Level
Provides the following sensor options:
High Signal
Low Signal
Signal Toggles
Input 1 Action
Allows you to mute the signal by factors of 10, 15, or 30
seconds when the doorbell is pressed.
Sensor Adjustment
Allows the installer to adjust the sensitivity of the sensor.
Input 2 Sensor Trigger Level
Provides the following sensor options:
High Signal
Low Signal
Signal Toggles
Input 2 Action
Allows you to mute the signal by factors of 10, 15, or 30
seconds when the doorbell is pressed.
Sensor Adjustment
Allows the installer to adjust the sensitivity of the sensor.