Entering new project information, Adding devices to the project – ClearOne NetStreams DigiLinX Dealer User Manual
Page 40
DigiLinX Dealer Setup Version 2.35.00
3-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Entering New Project Information
1.
Enter project information as follows:
Project Name. Create a unique project name for this project (such as “John
Doe’s House”)
Customer Name. The name of the customer for which you are creating this
project
Customer Address. The address of the customer for which you are creating this
project
Customer Phone. The phone number of the customer for which you are creating
this project
Dealer. The name of the dealer installing this project
Dealer Number. The phone number of the dealer installing this project
Dealer Address. The address of the dealer installing this project.
Once all the information is filled in, the Apply Changes button becomes accessible.
2.
Select Apply Changes.
The project displays in the left window pane (for example, “John Doe”). You are
ready to begin configuration. See Figure 3-4.
NOTE:
Project information is not for use by anyone but the installer. NetStreams has
no access to this information.
Figure 3-4
New Project ready for configuration
Adding Devices to the Project
NOTE:
Your dialog boxes may differ depending on what you have connected on the
network. If you don’t have a device described in this example, continue to the
section that shows how to enter device information for the particular devices
you want in your project (such as a SpeakerLinX or Media Server).
To add devices to the project, complete the following steps:
1.
From the DigiLinX Setup Wizard area (see Figure 3-4), select Continue.
A Devices area displays in the right window pane (see Figure 3-5).