ClearOne NetStreams DigiLinX Dealer User Manual
Page 64
DigiLinX Dealer Setup Version 2.35.00
4-6
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
NOTE:
If no media servers are attached to this system, you are notified in the left
window pane of DigiLinX Dealer Setup. Press Continue.
1.
If you have a media server attached to the DigiLinX system, select Match Media
Servers (
) from the bottom of the DigiLinX Dealer Setup program.
The Select a Device From List window displays (see Figure 4-7).
Figure 4-7
Select a Device From List window
2.
Click the device in the Select a Device From List window.
The device is highlighted in green.
3.
Select OK from the Select a Device From List window.
NOTE:
If you get a message stating that your media server isn’t set to the correct IP
address, click Yes to automatically pick up the correct IP address for the media
server.
The media server is matched to the project. The Streams tab displays (see Figure 4-
8).