Medialinx contained in an mla4000 - source tab, Medialinx contained in an mla4000 - source tab -29 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 99
Editing Devices
5-29
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
2.
The Relays tab displays settings for the four relays on the MLA4000. Relays can be set to Normally Open,
Normally Closed, or None.
3.
After adjusting information on the Relays page, select Apply.
MediaLinX Contained in an MLA4000 - Source Tab
You can adjust the settings for each MediaLinX contained in a MLA4000.
1.
Select the slot in the MLA4000 that you want to adjust settings for. The Source tab displays in the right side
of the window as shown in Figure 5-23.
Figure 5-25
Source tab for a MediaLinX in an MLA4000
The fields for the Source page are shown in Table 5-16.
Tab
Selection Description
Source*
Source Name
This name appears as a selection on all user interfaces and
is used to identify the device.
Driver File
The driver file for this particular audio source.
Source Type
The type of source (tuner, CD player, etc.) connected to the
MediaLinX.
Input Select
Allows you to select what kind of input the MediaLinX should
expect. Either Analog or S/PDIF.